LOADING AND UNLOADING EQUIPMENT

Product literature and/or specifications for Westec equipment available upon request

___________________________________________________________________

Westec Tunnel Loadout Conveyor

(48" x 70’ shown)

CONVEYOR Heavy-Duty Loadout Conveyor available in 36" to 48" belt widths

TUNNEL Engineered Fabricated Structural Steel Tunnel with non-skid floor

HOPPER Extra Large Receiving Hopper with liner assures good material flow

CLAM GATE Hydraulically Controlled 24" x 24" Double Clam Gate

Heavy-Duty Channel Frame Conveyor

• 20" or 24" Diameter Head Drive Pulley with 1/2" Lagging and Snub Pulley with 3/8" Smooth Rubber Lagging• Heavy Duty Self-cleaning Tail Pulley with Protected Screw Takeup• Shaft Mounted Reducer and Fluid Coupling • TEFC High Torque Motor• 5" Diameter Cema C Idlers on 3’ Centers • 6’ Loading Hopper • Receiving Hopper• 3-ply Belt with 3/16" x 1/16" Rubber Covers • Nip Guards

Westec Tunnel Loadout Conveyors

Size HP Tunnel Length TPH

36" x 60’ 30 HP 40’ Tunnel 1000 TPH

42" x 60’ 40 HP 40’ Tunnel 1500 TPH

36" x 70’ 30 HP 50’ Tunnel 1000 TPH

42" x 70’ 40 HP 50’ Tunnel 1500 TPH

48" x 70’ 60 HP 50’ Tunnel 2000 TPH

Shipped assembled as h far as possible.

AVAILABLE OPTIONS

• Air Clutch with Compressor for Rapid Cycle Times • Belt Scale with Loadout Controls

• 6’ High Bulkhead • 10’ Wide Hinged Wing Walls • Electrical Controls • Impact Bed

_________________________________________________________________________________

WESTEC HEAVY DUTY LOADOUT BUNKER

45 yard Heavy Duty Loadout Bunker

FEED CONVEYOR 42" X 30’ Conveyor

DRIVE 40 HP @ 1800 RPM TEFC motor with variable speed drive

CAPACITY Heavy-duty 45 yard (60 ton) hopper constructed of 1/4" plate steel

BELT FEEDER

42" x 30’ belt feeder is furnished with a heavy channel frame

20" diameter head pulley with 1/2" rubber lagging to minimize slippage and 14" diameter self-cleaning tail pulley

5" diameter CEMA "C" picking table idlers and heavy- duty screw takeup with roller bearing pillow blocks

40 HP TEFC motor drive assembly with torque arm reducer and fluid coupling

Skirtboards with adjustable 3/4" rubber, nip guards, and 3 ply 330# belt with 1/4" x 1/16" rubber covers

HOPPER

13’ x 15’ (45 Yard/60 Ton) hopper is fabricated of 1/4" steel plate reinforced and welded to frame with 4’ vertical sides and furnished with flow regulating control gate

1/4" steel vertical hopper extensions hinged with fold out sides to increase capacity

Fabricated of structural steel wide flange and tube members

Includes fifth wheel attachment, 22,000# single axle suspension, air brakes, and highway transport kit

OPTIONS

• 5" diameter CEMA "C" impact rolls in lieu of steel rolls in load area

• Belt scale and loadout controls

________________________________________________________________________________

WESTEC LOW PROFILE TRUCK UNLOADER

WESTEC 38 TON SELF-CONTAINED TRUCK UNLOADER

CAPACITY 28 yard/38 TON Skid-based Drive-Over Hopper unloads up to 600 TPH

FEED CONVEYOR 36" X 30’ Heavy-Duty Channel Frame Conveyor

DRIVE 30 HP @ 1800 RPM TEFC motor with Shaft Mounted Reducer

DRIVE-OVER HOPPER

• 28 yard/38 TON capacity drive-over hopper • Heavy-duty support beams

• Flat bar drive-over grid • 30" checker plate walkway with handrail on two sides

• 11’-8" high x 13’-4" wide 1/4" steel plate enclosure with floor (ends open)

The unit unloads up to 600 TPH.

CONTROL GATE

• Adjustable hinged steel plate control gate regulates material flow and controls capacity.

BELT CONVEYOR

• 36" x 30’ heavy-duty channel frame belt conveyor

• 20" diameter head pulley with 1/2" rubber lagging to minimize slippage

• 12" diameter heavy-duty self-cleaning tail pulley

• Heavy-duty screw takeups with roller bearings

• 30 HP TEFC motor drive assembly with torque arm reducer, class II service duty

• 5" diameter CEMA "C" troughing idlers • 5" diameter rubber disk return idlers

• Skirtboards with adjustable 3/4" rubber and nip guards

• 3 ply 330# belt with 1/4" x 1/16" rubber covers • Vulcanized splices and belt scraper

OPTIONS

• 5" diameter CEMA "C" impact rolls in lieu of steel rolls in load area

• Westec Rollerbed or Sealbed • Belt scale and loadout controls

• Variable Speed Drive

_______________________________________________________________________________________

PORTABLE HEAVY-DUTY HOPPER/FEEDER

Model HD-30 Spec Sheet

FEED HOPPER Heavy duty 1/4" plate steel 6’ x 13’ hopper with adjustable gate.

DRIVE 30 HP @ 1800 RPM TEFC motor with optional variable speed drive.

CAPACITY 14 yard capacity moves 200-800 TPH of material

BELT FEEDER

36" or 42" x 30’ belt feeder is furnished with a heavy channel frame

20" diameter head pulley with 1/2" rubber lagging to minimize slippage and 14" diameter self-cleaning tail pulley

5" diameter CEMA "C" picking table idlers and heavy-duty screw takeup with roller bearing pillow blocks

Torque arm reducer with 30 HP TEFC motor drive assembly

Skirtboards with adjustable 3/4" rubber, nip guards, and 3-ply 330# belt with 1/4" x 1/16" rubber covers

HOPPER

6’ x 13’ (16Yard/22Ton) hopper is fabricated of 1/4" steel plate reinforced and bolted to frame furnished with flow regulating control gate

PORTABILITY

Includes pintle hitch and 22,000# adjustable wheel axle assembly

OPTIONS

• Heavy-duty variable speed AC inverter drive in NEMA 4 enclosure

• 5" diameter CEMA "C" impact rolls in lieu of steel roll in load area

• 3/16" steel vertical extension with fold out ends

__________________________________________________________________________________

SKID MOUNTED OR

PORTABLE HOPPER/FEEDER

Model 813-915

FEED HOPPER Heavy-duty 12 to 16 yard hopper with 30", 36", or 42" feeder.

DRIVE 10 to 25 HP feeder drive with optional variable speed drive.

CAPACITY 12 or 16 yard capacity moves 200-800 TPH of material

BELT FEEDER

30", 36", or 42" x 20’ belt feeder is furnished with a heavy channel frame

12" diameter head pulley with 1/2" rubber lagging to minimize slippage and 12" diameter self-cleaning tail pulley

5" diameter CEMA "C" flat idlers and heavy-duty screw takeup with roller bearing pillow blocks

Torque arm reducer with 10 to 25 HP TEFC motor drive assembly

Continuous skirtboards with adjustable 3/4" rubber, nip guards, and 3-ply 330# belt with 1/4" x 1/16" rubber covers

HOPPER

8’ x 13’ (12 Yard/16 Ton) or 9’ x 15’ (16 Yard/22 Ton) hopper is fabricated of 1/4" steel plate reinforced and welded to base

Hopper is furnished wth flow regulating control gate

PORTABLE OR SKID BASE

Fabricated of structural steel wide flange and tube members

Unitized frame with reinforced steel bulkheads on both sides of the hopper

Portable unit includes fifth wheel attachment, 22,000# single axle suspension, air brakes, and highway transport kit

OPTIONS

• Heavy-duty variable speed AC inverter drive in NEMA 4 enclosure

• 5" diameter CEMA "C" impact rolls in lieu of steel roll in load area

• 2’ hopper extensions to minimize spillage

• Hydraulic heavy-duty tilting grizzly with spacer and remote

dump control

70 Ton Truck Loadout Bins

Features Heavy Duty Round Bin with Air Operated Discharge Clam Gate Mounted on Extra Wide Drive-Through Support Structure

· Support Structure - Main frame constructed of heavy wide flange beams with skid base. Wide stance provides ample clearance to accommodate large haul trucks with ease.

· Loadout Bin - Constructed of 1/4" steel plate on hopper and 3/16" reinforced vertical sides with round design to reduce segregation.

· Discharge Gate -24" x 48" Air operated discharge clam gate provides fast and accurate loading. Gate furnished with bronze bushing and 3/4" thick gearing for trouble free operation.

· Accessories - Air Compressor, adjustable conveyor landing and operator controls for truck and trailer.

OPTIONS

Custom sizes and configurations available for specialized applications. Give us a call. We’ve got the components that will improve your operation.

BACK TO WESTEC PRODUCTS